4BRKE Series

4BRKE Series

Specification: 10~32

Rated pressure: 350 bar

Rated flow: 90~600 L/min

Pilot type with integrated amplifier

Tel/Whatsapp: +86 133 2630 5108
Product Advantages

Pilot-operated two-stage proportional directional valve with electrical position feedback of the main spool, used to control the size and direction of the liquid flow

Sub-plate mounting type connection structure, connection size conforms to ISO 4401 standard

Spring centred main spool

With integrated proportional amplifier

The pilot control is a single-stage proportional directional valve

The pilot valve is a threaded proportional solenoid, and the coil can be disassembled separately

Technical Specs
General
Size1016252732
Installation and commissioning guidelinesoptional, preferably horizontal
Storage temperature range– 20  to + 80
Ambient temperature range-20  to + 50
Weightkg8.711.216.81731.5
Hydraulic ( measured at p=100bar,with HLP46 at ϑoil =40℃ ±5℃)
Operating pressure-Pilot control valvePilot oil supplybar25  to 315
-Main valvePort  P A BbarUp to 315Up to 350Up to 350Up to 210Up to 350
Return pressure

Port  T

(Pilot oil drain)

InternalbarStatic < 10
ExternalbarUp to 315Up to 250Up to 250Up to 210Up to 250
Port  YbarStatic < 10
Nominal flow qVnom ±10% at Δp=10bar
              (Δp = valve pressure differential)
L/min25        50-        125-        220-        --        440
100180350500600
Flow of main valve (max. permissible)L/min17046087010001600
Pilot oil flow at port X or Y with a step form of input signal from 0 to 100 % (315 bar)L/min4.18.511.711.713
Pressure fluidMineral oil(HL,HLP)to DIN 51 524 Phosphate ester (HFD-R)
Fluid temperature range10 to 80, preferably 40 to 50
Viscosity rangemm2/s20 to 380, preferably 30 to 45
Degree of contamination
Maximum permissible degree of contamination: NAS 1638.A filter with a minimum retention rate of βx = 75 is recommended
Pilot control valveClass 7x = 5
Main valveClass 9x = 7
Hysteresis%≤1
Response sensitivity%≤0.5
Electrical
Voltage typeDC
Electrical connectionPlug-in connector to DIN EN175 201-804
Power, max.W72 (average = 24W)
Control electronicsIntegrated into the valve


Send us a Message

A customer care representative will respond to you shortly.